WHICH DIAMETER OF PROCESS IS PREFERABLE – Elite Pool Cues Best Pool Cues

The tails processes for American billiards vary between 12 mm and 13 mm. Below 12 mm, this requires more precision and makes shots far and shots more difficult effects, because the white deflects more. At the top of 13 mm, it becomes more difficult to reach precisely the target point on the white ball and it is more difficult to transmit effects to the white best pool cues.

Another important factor is that of deflection. The larger the diameter, the more the white ball will deflect from its initial trajectory (an effect on the right will push the white ball to the left), but the smaller the diameter, the more the white ball will deviate from its initial trajectory (an effect right will deflect the white ball to the right). Playing with a specific diameter is more of a habit. It is therefore a question of finding a diameter with which one is at ease.

On the market, most American pool cues have a diameter of 13 mm. There are also 2 other important elements about the process: the material and the shape.

The material: The process (also called Tip), can be cork, plastic or leather (one piece or multi-layer). Leather is certainly the preferred material. Whether for the “one-piece” or the multi-layer, you usually have the choice between 3 different process densities: Hard, Medium or Soft (also called Spin ). If you use your best pool cues to break AND play – it is better to go for a hard process. A Soft process will apply much faster – and you need to change your process more often. A Soft process is favored for finesse shots, especially if you regularly use the bands. The “purists” of billiards advocate for a hard process, while the “artists” billiards advocate for a soft process. It’s up to you to see what’s right for you.

The form of the process is a real secret in the world of billiards. You can give the strength you want to your process (with the proper tools). Some prefer a more rounded form (the strength of a 5 cents), others prefer a flat process with rounded corners. A more rounded shape is preferred for shots with pronounced effects – however, you will have difficulty mastering long straight strokes.

If you’re unsure of the shape that’s right for you, start with a flatter process with rounded corners. Thus, if you feel that you lack teeth when you make a retro (back-spin), you can give a more rounded shape. If  the shape of your process is rounded and you miss even more bite, opt for a process of lower density.

Two small important notes:Usually, when you buy a best pool cues, the process has a “basic” shape. That is, you have to give it some form from the first use. Also know that the process flattens according to the frequency of use and the force you play. Obviously if you use the same tail to break and play, the process will flatten faster. Take great care of your process because it is HE that touches the impact ball. You are warned!

ormal to see the process flatten. You must then round off the process with an instrument provided for this purpose: a half cylinder whose inside is made of abrasive paper. On the other hand, over time, it becomes necessary to change the process. If you have never changed the process, purchase a “Process Change Kit” – then follow these steps. Step # 1: best pool cues  the process. With a thin, sharp blade, cut the process